A versatile, robust outdoor aerial ditribution point (DP) between the copper access network and the customer's premises. The closure is built to endure the harsh environment of outdoor aerial use, and has the capacity to hold 2x LSA-TL modules for a total of 20 pairs.
Application: Distribution Point (DP) between the Copper Access Network and the Customer’s Premises
IP Rating: IP54 – suitable for aerial applications
Max Capacity: 2 x LSA-TL modules (20 pairs)
Mounting: Wall mounted or Pole mounted
Cable entry: Multiple points at bottom of unit. Multiple cable diameters possible (see below)
Over-voltage Protection: Single or 10 pair protectors compatible
Locking mechanism: The box lid is hinged and it can latch open when being worked on.
Material: The box and lid is manufactured from a UV stabilised ASA material, UV resistant, UL 94 V-0, black Lid Technical Details Cable Entry
Drop wires enter to right or left hand side of the base.
Entry hole/ grommet in the box to accept the common earth wire, which should be terminated to either of the earth bars.
Each drop wire is strain relieved when entering through a specially designed cable retention management guide Module Housing
2 x 10 pair modules are housed within the DP. Right and left handed jumper rings.
The SS 2 way back mount frame provides good spacing between each 10 pair modules
The backmount frame is securely fixed to the base using M5 fixing screws into a threaded insert Over-voltage Surge Protection
Over-voltage Surge Protection
Single / 10 pair over voltage protectors can be fitted to each pair if required.
The flying earth lead is terminated onto the common earth bar situated both at the top and middle sections within the box.
The over voltage unit is retained when testing is required to be undertaken.
The flying leads have a pin terminal crimped to the end so termination to the earth bar is correctly undertaken. 6mm diameter hole required in earth bar.