Discrete Connectors

Discrete Connectors

Discrete Connectors (DexCrimp CWI8A)

Wire Insulated Connector with test facility

DexGreen's DexCrimp Connector Wire Insulated 8A is capable of jointing any two wires shown in the information detailed below.

DexCrimp provides reliable means of connecting copper or aluminium telephone conductors PE or PVC insulated with no requirement to strip the insulation.

The new DexCrimp 8A/1 connector is constructed so that when the idc is used there is a minimum of 4mm clear wire travel past the last idc blade.

Make Before Break Connectors (DexCrimp 11A)

Wire Insulated Connector

DexGreen's DexCrimp Connector Wire Insulated 11A is a new Make Before Break butt type connector employing U type insulation displacement connectors (idc's) and an integral cut-off blade, it will form a connection between two insulated conductors.

Entry to the connector shall be via two ports which will allow the conductors to be both passed through the connector and passed in from the sides. The connector has a pre-crimp facility allowing it to be held in position on the conductors prior to crimping with a tool.

Upon crimping the connector the excess conductor length is to be cut off, leaving an easily accessed environmentally sealable test point. When the connector is crimped, electrical contact through the contact elements takes place prior to wire cut off.

The new DexCrimp 11A shall be capable of being used on working pairs to cut out connectors previously in circuit.



Product Accreditations - Discrete Connectors

Datasheet - Discrete Connectors (DexCrimp CWI8A)

Datasheet - Make Before Break Connectors Connectors (DexCrimp 11A)

Technical Specification - Discrete Connectors (DexCrimp CWI8A)